Aidmer78-011 Extruded PTFE Rod

 Extrusion Teflon Rod: Dia.5mm ~ 200mm;  Lenght: 300mm/pc ~ 5000mm/pc. Extruded PTFE Rod has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Extrusion Teflon rod has the lowest coefficient of friction of all known solid materials.

Aidmer78-012 Molded PTFE Rod

Molded Teflon Rod Dia.20mm ~ 400mm;  Lenght: 100mm/pc ~ 300mm/pc. has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Molded PTFE rod has the lowest coefficient of friction of all known solid materials.

Aidmer78-021 Skived PTFE Sheet

Skived Teflon sheet: Thickness: 0.1mm ~ 6.0mm ; Skived PTFE Sheet is manufactured by molding with PTFE granular resin, corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide

Aidmer76-022 Molded PTFE Sheet

Molded Teflon sheet: Thickness: 3.0mm ~ 100mm ; Molded PTFE Sheet is manufactured by molding with PTFE granular resin, corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide

Aidmer78-031 Extruded PTFE Tubing

Extrusion Teflon Tubing: OD: 25mm ~ 410mm; Lenght: 100mm/pc ~ 4200mm/pc ; Extruded PTFE Tubing is made by extrusion of suspension polymerized PTFE resin. Among all the existing plastics, Extrusion PTFE has the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant Teflon tubes, and corrosion-resistant insulating Teflon tubes for different corrosive conditions, heat exchanger.

Aidmer78-032 Molded PTFE Tubing

Molded Teflon Tubing: OD: 25mm ~ 250mm; Lenght: 100mm/pc ~ 300mm/pc ; Molded PTFE Pipe is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, Molded PTFE has the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant PTFE tubing, and corrosion-resistant insulating Teflon tubing for different corrosive conditions, heat exchanger.

Aidmer78-040 PTFE Teflon Hose

Extrusion PTFE Hose is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, Extrusion PTFE has the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant PTFE Piping, and corrosion-resistant insulating Teflon Hose for different corrosive conditions, heat exchanger.